Easy TapSplitter Basic Kit is a toolkit that makes removing the Headnut or Headgear from your taps an easy and safe job reducing the risk of breaking chinaware or leaky connections.
One of the main problems when fixing a dripping tap is a seized tap head nut.
Brute force will be required with a spanner to unscrew the headnut and will usually result in causing the tap to spin and inevitable disaster.
This is because the tap itself is difficult to hold still, and to prevent it from rotating.
The solution? It's so easy with ABD using our Easytapsplitter toolkit - and completely safe.
The Easytapsplitter tap tool safely releases the headgear on single pillar or bib taps on your bath, basin, or sink requiring minimal effort.
Greatly reduces risk of causing chinaware to break or tap connections to leak.
![]() |
The Easy Tapsplitter does the job brilliantly - water tap renovation. Get the new tool specifically designed to do the job.
Do not take a chance and try to undo the head with spanner alone
Tapsplitter will apply all the force needed to unscrew the tap head,no matter how tight or difficult, and allow you to stop that dripping tap with ease. and allow tap washer replacement, reseating of the tap seat or any repairs to the tap spindle .
EasyTapsplitter toolkit is housed in a blow moulded carry case and includes clamp bolt, spout sleeve, sleeve liners x 2,, 32.1mm spanner and four x inserts to provide a range of five x headnut sizes (22mm, 19mm, 17.5mm, & 17mm) which will handle most Bib and pillar headnut sizes, an operating spanner, also in the kit are some common replacement tap washers (x 5) and a full step by step set of tap repair instructions.
Warning!
Do not attempt to unscrew difficult headgear on your tap to change washers etc, using a spanner alone, this can result in damage to pipework, Bath or sink, and/or tap itself. Play safe,Get an Easytapsplitter kit today
All flat metal parts are laser cut from mild steel sheet finished in BZP.
Spout sleeve is made from rigid Glass filled Nylon 66.
Spout length 134mm I.D 38.5mm
Spout liners are extruded EPDM rubber.
Spout Liner sizes x2 , Lengths 75mm, I.D.(small) 25mm I.D Large 32.5mm
Spanner Length 145mm Thickness 4mm
Hex insert sizes, 1 x 17mm 1 x 17.5mm 1 x 19mm 1 x 22mm
Tapwasher sizes, 2 x 25mm 2 x 18.5mm 1 x 16mm
©2021 ABD Tools Ltd. Web Design Company Adeo Group